Let It Snow, Let It Snow, Let It Snow

Category

Challenge Veterans

Project Details

This was a fairly easy project to do.  First off, I purchased the lighted slatted board from Hobby Lobby.  I then cut my ‘Let It Snow’ with snowflake tree on my Cricut Explore Air 2.  Before painting, I wrapped each of the lights with painters tape.  Next, I painted the slatted board with Testors Craft Matte in Stop Sign, using 2 coats.  Once it was good and dry, I applied my vinyl stencil, and daubed on Rust-Oleum Chalked Ultra Matte Paint in Linen White, which only needed one coat.  I then removed the vinyl stencil and let dry overnight.  Next I gave the whole project 2 coats of Rust-Oleum Chalked Protective Topcoat Spray in Matte Clear, making sure it was dry before adding the second coat.  Lastly, I removed the painters tape, and added a sawtooth hanger to the back of the board, and it was ready to hang.

Rust-Oleum Products

  • Rust-Oleum Chalked Ultra Matte Paint in Linen White (one of my favs)
  • Testors Craft Matte in Stop Sign
  • Rust-Oleum Chalked Protective Topcoat Spray in Matte Clear