Triple Thick

Submitted to Community Café

I could not find my marking knife so what do we do as makers. We make one. So I gathered some off cuts and a piece of steel. Now this one is a quick and dirty one I used some hard maple and I think mahogany. I used a router to hollow out the maple so I could fit a piece of steel in the middle, I then epoxyed in the steel after I put a quick edge on it and sandwiched it between two pieces of mahogany sanded shaped but it was missing something. So I used some Triple Thick sanded and another coat and back in business. I I'm very impressed with the Triple Thick polyurethane the pictures don't give it as much justice but it has a AWESOME finish to the wood. And very easy to use and very little smell. I love this Triple Thick Polyurethane. Thank You. Thom